12/27/2022 0 Comments Beko dishwasher installation guide![]() Now you can connect the drainage hose to the tailpiece. Make sure you remove any plastic bungs or stoppers on the tailpiece or on the U-bend. Simply unscrew the protective cap off of the additional inlet and screw the tailpipe on in its place. If you’re installing an appliance for the first time at this location, you may have to connect a tailpiece yourself. ![]() Preparing your new appliance for installation If you are going to remove it yourself, remember that you’ll need another person to help you lift and move the appliance. Your local council or district may offer a collection service. Place a bowl under the water supply tap to catch any leakage and place the ends of the supply and waste hoses in the bowl.Ĭheck local regulations on how to dispose of old household appliances. You may need to use a wrench or pliers to loosen the connections. You should now have access to the rear of the appliance, and be able to disconnect its electrical, water and wastewater connections. Then, you can pull the rug and the appliance out with it. To make it easier to pull out the appliance, you can tip it backwards and put a piece of old rug under its front feet. Remember, dishwashers can be heavy, so take care when trying to move yours. Pull the appliance out from its position. If the appliance is secured to cupboard units, unscrew any retaining screws. Make sure the water supply and that the electrical supply are switched off at the mains. Never remove a plug by tugging on the cable, always hold and pull the plug head. Make sure that the power cable does not get pinched or stuck. Do not connect the appliance to an extension cord. The use and the outlet should comply with the technical specifications table in Beko user manuals.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |